Solenoid Valve Connector DIN A LED And M12 Male 9pins Right Angle Connector With Cable
General Details
Poles: 2+PE 3+PE
Standard: DIN EN 175-301-803-A
Rated current: 16A
Rated voltage: 250V
Operation temperature:-40°c~+125°c
Insulation resistance:>20MΩ
Contact resistance: ≤4MΩ
Top cover: PC
Bottom cover: PA+GF
Contact: PS with silver plating
Screw: steel with Zn plating
Suitable for waterproof connector:
Suitable cable: 4.5~7.0 mm2
Connector locking system: central bolt
Termination: screw
Wire gauge (mm): min. 0,34 mm², max. 1,5 mm²
Wire gauge (AWG): min. AWG 22, max. AWG 16
Cable outlet: 6,0 - 8,0 mm
Electrical values
Rated current (40 °C): 10 A
Rated voltage: 250 V
Rated impulse voltage: 4000 V
Pollution degree: 3
Overvoltage category: III
Insulating material group: III
Volume resistivity: ≤ 15 mΩ
Insulation resistance: ≥ 10¹⁰Ω
EMC compliance: not shielded
Degree of protection: IP65
Mechanical operation: > 50 Mating cycles
Material
Contact material: CuSn (bronze)
Contact plating: Ni (nickel)
Contact body material: PA (UL 94 HB)
Housing material: PA
Solenoid Valve A Component part drawing
| M12 Technical data | PUR Cable | PVC Cable |
| Nominal current | 3A | 3A |
| Rated voltage | 30V | 30V |
| Contact resistance | <5m Q | <5m Q |
| Pollution degree | 3 | 3 |
| Degree of protection | IP67 | IP67 |
| Ambient temperature | ||
| Cable, fixed installation | -40°C. . . +80°C | -10°C. . . +70°C |
| Cable, flexible installation | -5°C. . . +80°C | -5°C. . . +70°C |
| Ambient temperature | -25°C. . . +90°C | -25°C. . . +90°C |
Product photos
FAQ
Q1. What kind of connectors you could supply?
A: M8, M12, M16, M23, Industrial waterproof connector, weipu connector, solenoid valve connector etc, also can customized based on buyer's requirements as long as tell us your details
Q2: How can I get a connector’s sample?
Sample in stock is free; you just need to pay shipping cost.
Q3: Is it OK to print my Logo on the product?
A: Yes, OEM/ODM service is available.
Q4: How to contact us?
A: contact us with email/whatsapp/wechat
Q5: Sample lead time?
A: One week.
Q6: Volume order lead time?
A: 3-4 weeks.
