M12 Molding 5pins A Code Male Straight Connector To Solenoid Valve Type B 3+PE Plug
Product Description
1. Nut structure, more tightly connected, firm
2. Silicone ring effectively prevents water and dust from entering
3. With new flame retardant/anti riot sun/antioxidant/anti-aging PVC plastic which is flexible and durable
4. Easy install
5. IP67,IP68 m12 waterproof connector Male Female Sensor Connect extension Cable
6. M12 Connector System for industrial automation and control applications provides a full solution that safely and reliably ensures communication in industrial environments
7. These connectors are designed for both front mount and rear mount panel installation
General Details
Contacts: 3+PE
Connector design: plug molding connector
Connector locking system: central bolt
Termination: screw clamp
Wire gauge (mm): min. 0,34 mm², max. 1,5 mm²
Wire gauge (AWG): min. AWG 22, max. AWG 16
Cable outlet: 6,0 - 8,0 mm
Upper limit temperature: 120 °C
Lower limit temperature: -30 °C
Electrical values
Rated current (40 °C): 10 A
Rated voltage: 250 V
Pollution degree: 3
Overvoltage category: III
Insulating material group: III
Volume resistivity: ≤ 15 mΩ
Insulation resistance: ≥ 10¹⁰Ω
EMC compliance: not shielded
Degree of protection: IP65
Mechanical operation: > 50 Mating cycles
Material
Contact material: CuSn (bronze)
Contact plating: Ni (nickel)
Contact body material: PA (UL 94 HB)
Housing material: PA
M12 Data
| Pin No. | 3 | 4 | 5 | 8 | 12 | 17 | ||
| Coding | A | A | A | A | A | A | ||
| Standard | IEC61076-2-101 | |||||||
| Rated current | 4A | 4A | 4A | 2A | 1.5A | 1A | ||
| Rated voltage+ | 250V | 250V | 60V | 30V | 30V | 30V | ||
| Operating Temperatur | -25℃~85 ℃ | |||||||
| Degree of protection | IP67/IP68 | |||||||
| Connector locking system | Solder | |||||||
| Mechanical operation | >500 mating cycles | |||||||
| Contact resistance | ≤10mΩ | |||||||
| Material of connector | CuZn | |||||||
| Contact plating | Au(gold plating) | |||||||
| Material of connector body | Cu,Epoxy resin | |||||||
Component part drawing
| Connector type | m12 to selnoid valve connector |
| Contacts | 2+PE 3+PE / 5PINS |
| Gender | female |
| Degree of protection | IP65 |
| Size of tail | PG7 or PG9 |
Product photos
FAQ
Q1. What kind of connectors you could supply?
A: M8, M12, M16, M23, Industrial waterproof connector, weipu connector, solenoid valve connector etc, also can customized based on buyer's requirements as long as tell us your details
Q2: How can I get a connector’s sample?
Sample in stock is free; you just need to pay shipping cost.
Q3: Is it OK to print my Logo on the product?
A: Yes, OEM/ODM service is available.
Q4: How to contact us?
A: contact us with email/whatsapp/wechat
