M12 8pin female 90 degree panel mount connector PCB type with IP68 degree for automation
| Note | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
|---|---|
| Rated current at 40°C | 2 A |
| Rated voltage | 30 V |
| Rated surge voltage | 0.8 kV |
| Number of positions | 8 |
| Insulation resistance | ≥ 100 MΩ |
| Coding | A - standard |
| Standards/regulations | M12 connector IEC 61076-2-101 |
| Status display | No |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Connection method | Solder pins |
| Insertion/withdrawal cycles | > 100 |
| Torque | 3 Nm ... 4 Nm (Installation-side) |
| Flammability rating according to UL 94 | V0 |
|---|---|
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Material, knurls | Stainless steel |
| Sealing material | FKM |
M12 90degree panel mount connector is one of Sensor/actuator flush-type socket,high-grade steel version
About the M12 panel mount connector
We have 3/4/5/8/12/17pin Shielded and not shielded versions. A B C D X S T Y K L M coding all OK.
Panel mount thread locking M12x1,PG9,M16x1.5 .Rear panel mount and front panel mount
90 degree and Straight type for all. Degree of production IP67/P68 and IP69K.
Cable length customized(PVC,PUR,TPU etc) CE/Rohs/REACH/IP68 etc Certification
OEM and ODM. Welcome your order.
